The machinist of technological pumps is a very important and necessary profession. All the features of this work will be discussed in this article.
The specialist, which will be discussed in this article,is engaged in servicing special equipment for pipelines. It does not matter what pipelines can be: main or vapor, designed for liquid substances or for gaseous ones. In order for certain substances to circulate, it is necessary to maintain, repair and constantly check the available equipment. This is precisely what the representative of the profession in question is doing.
And what about the relevance of the profession? Since the majority of enterprises in the CIS countries work with internal communications operating under certain pressure, the work of the machinist of technological pumps will remain demanded and needed in the labor market for a long time.
The machinist of technological pumps, as well as any other employee, has many duties, functions and functions.
Of course, he has a machinist of technological pumps and many other functions. But it depends on the discharge of a specialist.
The representative of the profession in question, of courseI could not work without proper education. Practically anyone who wishes today can go to college or technical school, specializing in "machinist of process pumps and compressors". And what knowledge and skills are necessary to work in the specialty in question? Here are just some of the things a worker should know:
Above are just a few points that will need to be learned during training. It is also worth noting that in the college or technical school will have to learn the following subjects:
Thus, it will not be possible to occupy simply a workplace in the specialty of "machinist of technological pumps". Training is the necessary and most important component of the profession.
Young people who graduated from an educational institution in the required specialty are unlikely to get into a difficult situation with a job search.
It is worth noting that the profession in questionfits not all. In the workplace, it is unlikely that physically weak, weak people will feel comfortable and confident. After all, the work in question is truly masculine, somewhat difficult and difficult. But it is compensated by all the excellent opportunities for career growth and good wages.
Second-class workers are, as a rule, newcomers who are just beginning to master all the subtleties of the profession. What are the duties of such specialists?
The second-class worker is obliged to servepumping stations, as well as installations that pump or prepare oil. Preparation of schemes for technological strapping, elimination of leakage of products (under the guidance of a worker with a rank above) - all this also falls within the competence of the worker. It is necessary, among other things, to constantly monitor the operation of pumps, cooling systems, lubrication, ventilation, etc. The control of the serviceability of various valves, measuring devices, pipelines also falls on the specialist of the second level.
It is worth mentioning and some other functions, namely:
Naturally, not all the functions of a second-class worker were mentioned above. After all, the duties and their number depend on the enterprise in which the professional activity is carried out.
The worker with the third category is obliged to produceconstant inspections of pumping stations, to service them (it is a question of stations pumping over and preparing oil products with a capacity of 500 cubic meters per hour).
However, this is far from all duties. The instruction of the machinist of technological pumps prescribes for the specialist of the third category the following functions:
What functions are assigned to the representative of the fourth category by the job description? What duties does the machinist of process pumps carry?
actuators of contactors of alkylation plants;
In addition, the specialist is obliged to monitornecessary pressure on pumping out. Control over transformer substations (under the direction of a worker with a rank above) is also the responsibility of a specialist with a fourth rank.
Depending on the place where the expert works, the functions may vary slightly.
The machinist of technological pumps of the fifth category is obliged to perform the following functions:
Among other things, a worker with a fifth class is obliged to observe the rules of labor safety, correctly organize a workplace, provide first aid, etc.
What is the duty of the worker who has the sixth rank to do? What are its functions?
It is also worth adding that the specialist with the sixththe discharge already has the right (or, rather, the duty) to manage workers with lower qualifications. There are a lot of tasks here: control over the work, training of workers in certain skills, etc. Again, the number of duties will depend only on production.
The worker, who has the seventh rank, is endowed with the following functions and duties:
In addition to all of the above, the drivertechnological pumps with the seventh category is obliged to work with documentation. Drawing up plans for testing, checking and repairing pumping equipment is also part of the employee's responsibility. Plans are also being made to develop operations to improve service, to increase the operation of various devices. Also, a specialist with the seventh level is required to manage employees with lower qualifications. Here everything will depend directly on the enterprise: in the competence of the employee with the highest level will be only those functions, which will be given by the authorities.
As in any other profession, there are enough advantages and disadvantages in the work of the specialist in question.
But there are disadvantages in the profession in question. Among them we can distinguish: