The floor (epoxy) is considered one of themost optimal coatings. The material can be used both in residential and industrial premises. Filling polymeric epoxy floors have an excellent appearance that persists for a sufficiently long period. The service life of the coating is not less than 10 years. In addition, the two-component epoxy filler floor has excellent performance. Thanks to them, this coating is in no way inferior to other materials. Next, we'll figure out how to make epoxy self-leveling floors with your own hands.
What are they? The epoxy flooring floor is often called "liquid linoleum". This is due to its appearance and application technology. Previously, such a coating was used exclusively in industrial buildings. But over time, the floor (epoxy) began to be laid in the apartments. One of the main features of the coating is that after its application an ideally flat base is formed. Other advantages that the floor (epoxy) possesses include resistance to moisture, abrasion and fire, strength and hygiene. The undoubted advantage of the coating is its ease of installation. Filling does not require any special equipment or tools. You can apply epoxy self-leveling floors with your own hands, even without special production skills. The whole process does not require much time or effort. There is no need to spend large sums of money for the purchase of material. Today, the bulk floor (epoxy) is a coating that combines high quality and affordable cost. That's why it's so common.
The filler floor (epoxy) is applied in severalstages. Each stage has its own characteristics. The main task is the consistent execution of all actions. This will largely depend on the final result of the work. In this regard, even before the start of pouring, you should familiarize yourself with the basic recommendations for laying the coating.
Surface preparation is an integralalmost any finish. Working with the base involves cleaning it from various contaminants, including dust, oil, debris, other industrial and household substances. To do this, you can use a powerful vacuum cleaner and various cleaning means - solvents of fats and oils and other compounds. If there are various defects on the surface, they must be eliminated. In particular, this applies to various cracks and chips. They must necessarily be puttyed. In this case, the coating will not only lie right, but will also last for many years. When overshoots are too large, we recommend that you first align the base. For this, a leveling mixture is used.
During the installation process, it is necessary to ensureMaximum adhesion of the coating to the surface. For this, before making the floor (epoxy), the substrate should be primed. Apply the mixture in several layers - their number will depend on the porosity of the surface. Primer is sprayed evenly over the surface. It must be ensured that there are no puddles on the ground. For spraying, a spray gun is used. With this tool, the primer is applied in thin layers and quickly.
Before filling it is necessary to determine the degreedeviation of the base from the horizon. To do this, use a straight rake or level. In accordance with the obtained data, the thickness of the coating layer is determined. It is in the range of 2-10 mm. The first layer is poured onto the prepared substrate. Between the connections of different portions of the material must pass at least ten minutes. During this period, the mixture will dry a little, and the joints will be suitable for processing and leveling. The complete drying of the first layer occurs within five to seven hours. Accelerate the process can create an optimal temperature regime in the room (12-25 degrees). Strength and beauty of the floor will increase if you create a second layer.
Five to seven days after the drying of the secondlayer on the surface of a special material. Usually, epoxy paint is used as a decorative coating. It not only is a decoration of the surface, but also provides protection against mechanical and other aggressive influences. If necessary, after a certain time, you can update the decorative coating, thus preserving its appearance.
It should be noted that the process of pouring polymerfloor does not require stopping other finishing or construction work in adjacent rooms. The components that are present in the material are completely harmless to humans and animals. The coating does not have an unpleasant smell either during application or during operation. Care of the coating is also quite simple. It should be cleaned regularly with a damp cloth with a soap or gel solution. No need to use abrasive compounds. Dirt from the surface is removed quite simply. Polymer floor can be poured into any room of the apartment: in the bathroom, in the kitchen or in the hallway.
The article gives a brief guide to creatingpolymeric flooring. Apparently, the work does not require special knowledge or skills, complex equipment or a large number of tools. The process is not complicated. However, for high-quality performance of work, it is necessary to follow the recommendations. In particular, this applies to the preparation of the base. From the thoroughness of this work will depend on the strength and durability of the coating. In addition, it is important to take care of quality polymer material for pouring. Today, there is a fairly wide range of these products on the market, so there should not be any difficulties with the choice. When preparing the solution, follow the manufacturer's instructions. As a rule, all recommendations are indicated on the packaging.
