You moved into a new house or ordered a metaldoor to the apartment - in all these cases one has to think about how to hit the lock: call a specialist or, perhaps, manage independently. For those who are thinking how to deal with this problem on their own, the following tips will help.
Locking the lock in the wooden door
It is believed that it is only possible to insert a lockspecialist. In fact, you can deal with the problem yourself, only you should consult with a knowledgeable person beforehand, prepare tools and get to work.
If before you there is a question, how to embed the castle inwooden door, follow the tips below. First you need to note the height for locating the castle. Then you need to attach the back of the lock to the end of the door and circle it around the edges. Next, pick up a drill, so that it is smaller than the width of the lock, and drill them holes, the depth of which will be the same as the length of the lock. Using a chisel and a hammer, remove the residues. Check if the lock is in the resulting hole. Now you need to make a markup for the front bar. For it, it is necessary to make grooves so that the end of the door and the outer side of the lock coincide. Then it is necessary to measure the places where the cylinder mechanisms of the lock will be located. To do this, in the sides of the door make a neat hole drill.
Insert the lock and check: whether the drilled holes coincide with the holes in the lock. After making sure that everything is fine, make a hole in the end of the door under the screws with a thin drill. At the last stage, install handles, slats, lock secrets. Now you need to check the operation of the mechanism and fasten the lock. After the lock is inserted, it is necessary to install a bar on the door frame.
For easy matching of the tongue with the hole,in the jamb, it is recommended to apply a paint on it that is easily washed off, close the door and turn the lock to the closing position so that the tab can leave a mark on the door post. The resulting marks are cut down with a chisel and a hammer so that the exact size of the tongue is obtained. Then attach the bar to the cut hole and outline its shape. Using the drawn line, make a groove for the bar on it. It must coincide with the level of the surface of the jamb. Under the screws that fix the bar, make holes and screw it. Having finished the work to check the work of the castle, everything turns out well.
Locking a lock in a metal door
If you care about the safety of your apartment,then, undoubtedly, they ordered a particularly strong front door. Now there may be a problem how to lock a lock on a metal door, but it is easy to solve it if you have studied the above tips. Since in many respects the process will coincide, except for the selection of the necessary tools. You should approach the task with attention and accuracy. After all, the integrity of the apartment and the life of its inhabitants will depend on the quality of your work.
Before the embedment of the castle, marking is carried out. To mark the contour and hole for the key, it is enough to attach the lock to the place where it will be installed and make a note with an awl. On the side of the door make a marking with a square, where the lock will be embedded. Do not forget to note and remember the thickness of the lock.
Drill, diameter equal to the thickness of the lock, inrectangle, marked on the door, drill a series of holes through which you can remove excess material. To work on metal useful file. They need to make a hole in the door in a rectangular shape so that the lock can fit into it.
Inserting the lock into the resulting hole, it is easymake the markings with an awl to install the front bar. In order to fit the groove in the groove flush, the material should be selected by chisel. The stop bar needs to be cut in front of the front. In order not to be mistaken, since to lock a lock is a matter requiring accuracy, it is necessary to mark the markings with a bright marker or chalk at the ends of the lock bolts, so that the visible door is left on the door jamb from the opposite side. Further - to cut and fix a lock lath. Check the operation of the lock mechanism.
Now you know that to lock a lock is not such a difficult thing, if you approach it with care and attention and try to do the work accurately and qualitatively.
