Details on how to make a watch in the "Maincrafter"

Today we will discuss the issue of how to make a watch in the "Maincrafter". Game time moves faster than real time. To monitor this process, you need a clock. Next, we describe how to create them.

Instructions

In order to understand the question of howit's important to understand that this item is similar to a compass. It should be created in a similar way. The clock can be put in inventory, worn on the belt or on the hand. In addition, this item can be on the ground, also displaying the time of day.

The watch disc is divided into two halves, one -of blue color. It is a day. The second part is black, indicating the night. The disk continuously rotates uniformly throughout the day. In addition, the clock has the designations of the Moon and the Sun, indicating the position of these heavenly bodies.

Later, it became possible to fix this element on the wall as an accessory. Also we can put the clock on the floor. They are attached using a frame.

Now let's talk about the miners' life. In this case, the clock refers to the necessary resources. The fact is that using this object, you can much better navigate, being inside the mine. In order to understand the question of how to make a watch in the "Maincrafter", we will need such components: one unit of red dust and 4 gold ingots. We need to find the right ore. From it you can get red dust. You will also need a stove. In it we melted the gold ore and obtained the necessary ingots.

Creature

So, we proceed to an immediate solutionthe question of how to make a watch in the "Maincrafter". We place the specified resources accordingly in the window. We put the red dust in the center. We have gold bars on four sides of it.

Important note: to find out the current time, it is not necessary to create a clock, spending resources for this. You can place all components on the workbench, and then close it. In the Lower World and the Edge, the clock is useless. There they are malfunctioning, since the disk is spinning in all directions.

Construction

In addition to the usual, we can also createmechanical watch in the "Meincraft". This is a colossal project. To begin with, we erect on the ground a large wooden blank with a hole for the dial. Next, proceed to mounting the mechanism by which the arrows rotate. It all starts with pistons. They are located around the structure. After that, inside we create a ring of glass. In this case, the two corners must remain empty. We need to create another glass ring, on top of the previous one. Go to the installation of arrows. We put the minute down, and the hour one - up. Then the pistons are connected in such a way that they can push the blocks in a circle. We connect the corresponding elements with wires. It is necessary that the minute hand is activated every 4 seconds. We give a signal, bringing the mechanism into motion. In this case, the short pulse generator will help us. Now you know how to make a watch in "Maynkraft" and what they are for.