Back in the year of 2009 sales startedrouter Asus RT-G32. Setting it up is a fairly simple operation, and with it you can cope with the beginning computer specialist. It is her order for different operators and will be given in this material.
By the standards of 2009 the considered routercould be safely attributed to network solutions of the middle level. Now the requirements have changed significantly, and only to the most budgetary devices can be attributed considered in this article Asus RT-G32. The setup is certainly simple, and there are no problems with it. The key advantage of this budget router is its cost, which at the moment is 1000-1200 rubles. Taking into account the fact that this product has already been tested by time and managed to show itself mostly only from a good side, such a price is fully justified.
Typical parameters of the technical plan for boththe entry-level network solution boasts Asus RT-G32. Setting up WiFi in this case is standard, and nothing super complicated in it certainly not. The number of wired ports in this device is 5, and all of them are RJ-45. One of them is blue and has a WAN mark. The maximum speed in this case can reach 100 Mb / sec. It is to him that the wire from the provider of network traffic is fed. The remaining four are yellow and are labeled from LAN1 to LAN4. Local devices of this network are connected to it, to the number of which game consoles, television sets, computers, laptops and other equipment can belong. As in the previous case, the highest transmission rate is 100 Mbps. One round socket is designed to connect an external power supply. The wireless part of the network is realized using the Wi-Fi standard. At the hardware level, it is implemented by one antenna, and the transmission speed in this segment can reach 150 Mb / s.
At the first stage it is necessary to fully connectAsus RT-G32. The configuration is identical for all providers. First, you need to connect the power supply to the AC mains and the corresponding socket on the router. Then we bring the cord from the provider and connect it to the port labeled WAN. In the end, if necessary, we connect all the wired devices of the computer network to the router. Separately, it should be noted that the computer must be connected directly to the router via a twisted pair to configure any LAN port. And it can be both a desktop computer and a laptop. After completing the configuration, this connection is not required, and it can be dismantled with the equipment turned off. In the future, it can be replaced with a more convenient and practical Wi-Fi.
First, we'll look at the order of the settings for the cable provider Beeline of the Asus RT-G32 router. Beeline settings require the following settings:
1. After enabling and ending the download of components of the computer system, such as a router and a personal computer, on the latter we launch any browser that is available. In its address bar, type the device address: 192.168.1.1. Click after that Enter.
2. Then you must wait for the control panel to finish loading. There will be two active fields in the interface. One of them is "Login", and the second is "Password". In each of the fields, you must enter the admin set. After filling in both fields, press the "Login" button.
3. Then, when the router configuration menu appears, select "Advanced settings", and in it - the WAN subkey. Here we set the following parameters:
4. After that, we save the changes made by clicking the "Apply" button and wait until the network node reboot completes.
5. After downloading the router, select the "Network Map" item. In it, we set the following parameters:
6. Press the "Apply" button again and wait until the device is rebooted.
7. After that, the Asus RT-G32 is properly configured. Setting "Beeline" -connection is complete.
Not so different is the setup algorithmfor MTS network router Asus RT-G32. Setting up the MTS, as in the case of the "Beeline", begins with the entry into the setup menu according to the previously described method. Then in the menu item called "Advanced settings" select the subsection WAN. It sets the following parameters:
We save these parameters and wait for the reboot of the router to finish. After that it is necessary to configure the wireless connection using the same algorithm as in the case of "Beeline".
In this case, the order of adjustment is identical withpreviously given for MTS. Moreover, this is based on the same PPPoE protocol for Asus RT-G32. Setting up Rostelecom requires the same actions. The only thing you need not forget is that the password and, of course, the login are entered from the contract.
The fact that theThis material network router has more than 5 years successfully sold, says a lot. For the world of electronic technology this is a whole era. At the time the sales began, this decision was related to the average level. Now the Asus RT-G32 belongs to the budget segment. Tuning is a very simple operation, which even the beginner and the poorly prepared user can certainly cope with. To do this, just enough to fully implement all the previously mentioned steps for each operator.
