Stork for the garden with their own hands: three unique ways of handicrafts from improvised materials

Stork for the garden with your own hands from the plywood is donequite simply. To do this, do not look for a place in the garage or rent a storage room: a fairly spacious kitchen and mother-in-law, a great fan of crafts.

For the process to go quickly, buy on the marketbuilding materials, a six-millimeter sheet of plywood and paint that go to renovate the facade of the house. The tool, if not enough, ask the neighbor or rent it. Stork for the garden with their own hands - an interesting piece, but a little capricious. Patience is the main condition for doing the work, otherwise you can delay the work so much that close relatives will rather buy metal figurines than will wait until you are inspired.

Stork for the garden with their own hands

To make a stork for the garden with your own hands was made in a few days, follow the tips:

  1. The piece of plywood must be rectangular in shape, with sides of 850 and 580 millimeters.
  2. Paint is better to take white. To her, buy a black and red dye. With competent breeding, you will receive an exceptionally persistent color.
  3. Do not give up waterproof varnish: it will help protect your product from rainfall.
  4. Sandpaper is enough and half a meter.
  5. Use a jig saw to use electric.
  6. Brushes - at your discretion.

With copy paper, transfer the contourstork on the plywood, if the drawing is already printed on a thin newspaper sheet, plug in the power cord of the jigsaw and carefully cut out the body of your stork. To poultry "put on their feet", you can also stand from the remains of plywood to cut.

Edges grind pieces of sandpaper,cover with the first layer of varnish, allow to dry. Now you can take paint. Prepare 3 kinds - red, white, black. The first tone is on the nose, the second on the trunk and up to the middle of the wing, the third is let into the empty seats. Leave for 8 hours. Check the paint for strength and apply another layer of varnish on top.

You can put steel wire on your legs orthin reinforcement. Mount it to the trunk and stand, cover with red, the places for the eyes deepen with a few strokes of the hammer, fill the potholes with black varnish for furniture and leave for a day. If there is no reinforcement, then you can use the old ski poles. Stork for the garden with their own hands and on the ridge of the roof is paved if desired, if you tie the body to the mop, the wide part of which goes under the rafters, where nails are nailed.

What else can you do for the garden with your own hands? Fly agarics from hemp and pelvis, figurines of animals from cans, a unique bed in pink tones.

for the garden with their own hands

But the stork is somehow closer to the heart of the Russian people. From gypsum and clay, you can also glaze this noble bird, with one bottle of plastic, 500 g of gypsum, gauze bandages and metal rods that bend well, 3 cans of mounting foam.

garden arbors for own hands

Pergolas for the garden with their own hands, too, do notcomplicated. If there is a picture or a model of a gazebo made of wire in front of your eyes, then, having the skills of a welder, you can "bungle" the Chinese construction in 5-6 days.

gazebo with your own hands

While you are wasting electrodes, ask formy beloved mother-in-law is sewing sidewalls and a roof from the canvas, and my wife - to pull the material onto the iron frame. Buy cheap furniture and enjoy the conversations under the merry rumble of the boiling samovar.

Liked:
1
House of natural materials. With your own hands
Handy "Traffic Light." With our own hands do
Stork of plastic bottles with their own hands -
Decorative mill for the garden: its
Figures for the garden with their own hands, or How?
Arbor: with your own hands
We create a unique design (decorative
What can be done decoration for the garden and
Fence by hand from improvised materials
Top Posts
up