Vehicles with three wheels andmotorcycle engines are called trikes. Broad industrial production is not established, and the production of small companies is expensive. You can make a tricycle with your own hands from the finished parts and components used in cars and motorcycles. This process takes quite a long time, which means that you will need an equipped room.
There is a natural question, how to do ita tricycle with your own hands from available materials and parts of factory production? It is necessary to begin to understand the device of this vehicle. The classic layout scheme involves the installation of one wheel in front and two in the rear. Advantageously, a part of the reinforced motorcycle casing is used in the front part.
The supporting structure must be designed forincreased load. A thick-walled pipe with a diameter of at least 20 mm is used for the frame. The connection is made by electric welding, the junctions are strengthened by kerchiefs made of sheet steel. Before the work starts, a large-scale model of the framework should be made. A flat image has little in common with a real design realized in a metal.
A tricycle is assembling with his own hands on the frame, whichconsists of two parts: the front of the heavy motorcycle and the rear - homemade. In the design, there must be places for the installation of an engine, a rear suspension with a reducer, a fuel tank of increased capacity. In addition, the frame is welded to the nodes for mounting shock absorbers, full-size seats and vehicle controls.
Of the domestic brands of heavy motorcycles the besttricycle - from the Urals, with his own hands it is manufactured with the placement of the engine in front. Such a scheme has a number of advantages and it differs primarily in simplicity and reliability. Brackets are welded in the place of installation of the power unit. Tracks use air-cooled engines, one of the best options is the ZAZ-968 engine.
The power unit is mounted on a tricycle by its ownhands in such a way that the incoming airflow blasts the engine well. It is recommended to install the PTO shaft with additional dampers, placement of cardan joints or SHRUSS as close as possible to the gear unit. The mounting points of rotating parts must be necessarily closed from accidental access.
Tricycles belong to the category of transportfunds that are created for special trips. The appearance of them must be presentable and elegant, in the exterior is allowed an abundance of chrome parts. The standard fuel tank has insufficient capacity, and it is often used as an installation site for the instrument panel. The same capacity for gasoline is installed in the engine compartment.
A large set of tricyclesquantity of the various equipment. Musical centers with powerful acoustics, fog lamps and other devices need power. A powerful generator is installed to provide power supply.