Polishing the headlights with your own hands

It often happens that car headlightsThey lose their former clarity, they cover themselves with a touch, and the light that emanates from them becomes dim. In such cases, many motorists try to quickly replace the main engine light-emitting diodes, without even thinking about the fact that polishing the headlights can be a good alternative. Thus, you can save a significant amount, because you can polish the plastic light diffusers, as well as the lights themselves and can be in the car service, and at home, in their own garage. As a result, the lighting will be as bright as possible and travel on night roads will cease to be dangerous.

Most often on modern cars, LEDsframed in light diffusers, made of plastic. This material is very sensitive, therefore, splashes, debris that meets on the roads, damages it, leaving scratches and a dusty layer. Because of this deterioration of the visibility of the road at night, which can lead to a serious accident. Therefore, in such cases, polishing the headlights is a must. It will allow to normalize the optical properties of plastic caps, as well as direct light sources - that is, lanterns.

If the plastic headlights are polishedwith their own hands, it is important to have the necessary equipment, as well as cleaning mixtures. All this can be purchased at the appropriate stores or at the service station, since simple detergents and napkins can not cope with the dusty coating that forms over time on the surface of the headlights.

That's why many car ownersprefer to produce this procedure in services, and not at home, because professionals are able to quickly and efficiently conduct work of any complexity, regardless of the degree of contamination and surface fading.

Polishing the headlights starts with grindingsurface with the use of granular skins. Grain index always depends on the depth of scratches that formed on the plastic surface. In order for such work to be more effective, water is applied, and at the same time all cracks are cleaned of dust and dirt. Grinding the headlamp, it is important to ensure that its surface remains smooth and smooth, without hollows and humps. Therefore, most often deep debris is first cleared, but only after the plastic itself is leveled.

Further polishing of the car's headlights is the use of abrasive pastes, which gently clean the surface, smooth out small cracks and scratches.

Some polishes that have in their compositionabrasives, it is necessary to apply to the surface and leave for a while. For a thorough cleaning, several pastes are used, and at the very end of the procedure, a substance that does not contain such elements is applied to the plastic surface. Thus, the headlamp becomes as clear as possible and provides a clear visibility on the night road.

To polish the headlights was carried out asyou can less often, you need to monitor your car, wash it regularly and do not forget to polish the lights if they are heavily soiled. For frequent procedures, simple water and a rag are suitable, and any machine will always look like a new one.