The question "How to make a machine from a tree?"can arise in 2 cases: you need to make a nice gift to your child or make a special copy of the craft in your own collection (or for sale to the collector, but it does not change the essence.) In the first case, there are no special requirements for the product, but in the second situation is becoming more complicated, and we need to try very hard to make a really high-quality weapon, but regardless of the purpose of the machine, the sequence of actions remains the same.
Before you make a machine from a tree,you must carefully draw it. For this, a qualitative sketch is made. You can do it yourself (for example, draw if there is such a talent, or apply a PC for these purposes with special software). In the simplest case, the finished sketch can be found in special literature or on the Internet. If the sketch is yours, then these blanks must be worked out and manufactured. It is necessary to work out the entire structure of the machine. Each component is necessarily drawn, then the assembly of the weapon is analyzed.
At the next stage of how to make an automaton from a tree, you need to determine the set of tools and workpiece. For rough finishing you will need:
These are the basic tools for preprocessing the workpiece, in addition to which you may need something else. For final processing, a file, a filter and sandpaper are used.
Next, you must select the workpiece. It is recommended to choose coniferous tree species, it is easier to work with them. Usually they take everything with a 10% margin, but it is recommended to increase this number to beginners. If something goes wrong, the tree stocks will allow you to correct the result of the work.
Then, in the process of how to make an automaton fromwood, patterns are transferred to the material, its rough processing is done. Gradually, each of the elements is cut or cut. After all the excess parts of the workpiece have been completely removed, you can start grinding. Files are ideal for these purposes. Then you can use the files. At the final stage it is recommended to use an emery cloth, gradually passing to a smaller one. At the very end, it is best to apply a zero number, which allows you to get the smoothest surface.
Then everything must be properly arranged. The tree must be opened with a varnish in two layers. In turn, the place of application of the paint is pre-treated with a primer. After applying the first coat of paint, it is necessary to withstand the time, which will allow it to dry, and only then continue the design. After drying, the machine is ready, and it can be used for its intended purpose. The above algorithm allows you to make not only a machine from a tree, but a pistol, a bow or a crossbow. It is universal and, depending on the flight of fantasy, with its help you can do very much.
