Closet with own hands

If there are niches in your house, thenit will be correct in order to save useful space to arrange in them a closet with their own hands. Of course, this occupation is quite laborious, but real. Since the niche often has non-standard sizes, it is not possible to just buy a cabinet in a furniture store. The built-in cupboard provides for its location from the floor to the ceiling, and width will be determined by the width of the niche. Making a cupboard with your own hands here will be reasonable and effective.

So, let us pass directly to the question, howmake a built-in closet. First of all, you need to remove the dimensions of your existing niche (height, width, depth). It should be noted that the dimensions should be removed with the utmost precision.

The next, important point isdesigning and manufacturing of drawings. In fact, the internal filling of this kind of furniture depends only on your personal desires, but I want to say that your future wardrobe should be both a place for storing outer clothing, and have shelves for storing it.

For the manufacture of drawings you can usespecially created for this software, or do it manually, drawing your future furniture on a piece of paper. But it should be taken into account that the shelves of the cabinet decrease in depth by a distance that is equal to the width of the upper guide of the sliding system. As a rule, this is 90 mm. The advantage of the software is that you instantly get not only all the necessary parts sizes, but also that the program will tell you where and how to fix the details.

Next, we define the material for the cabinet. Usually, laminated sheets are used for this purpose
Particleboard, which have dimensions (2050 × 1830 × 16 mm). Sawing DSP, and produce adhesive edge material is best in enterprises that specialize in this type of work. You can, of course, saw the chipboard and glue the edge yourself, but trust me, you can not make parts of this quality, as will special machines for gluing and sawing the material.

Creating a closet with your own hands, we should not forgetand a sliding system to it, which can also be ordered at these enterprises. At the order it is necessary to consider some nuances: the width of the sliding system will be the width of the niche minus 32 mm, where 32 is the thickness in the sum of the right and left sidewalls of the furniture. If the cabinet does not have a top and a bottom, then the height of the sliding system will be equal to the height of the niche, well, and if there is a "bottom" and "ceiling", it is necessary to take 32 mm from the height again.

After obtaining all the necessary details, you canproceed with the assembly of the cabinet. First of all, with the help of confirmats, we connect the bottom, the roof and the sides of our structure. The role of the bottom and roof can be played by the upper and lower shelves of the cabinet. This is provided that you have a sliding system attached to the floor and ceiling. To make holes for confirmations, you will need a special drill, which can be purchased in any construction shop. After the assembly of the case, install it in a niche. We further strengthen the shelves in our design. You can do this in several ways: with the help of shelf holders or metal (plastic) corners. The end result of your work will be the installation of a sliding system. For this we attach the upper and lower guides and insert the doors of the compartment into them.

That's all, the cabinet with its own hands is made and installed - and this does not require much time and money.